UEFI (Unified Extensible Firmware Interface) is an advanced replacement for the traditional BIOS. Compared to BIOS, UEFI offers faster boot times, a graphical user interface, Secure Boot support, and better hardware compatibility.
If you recently installed a new SSD but your system doesn’t recognize it, or you need to modify the boot order, entering the UEFI settings is essential. However, pressing F2, DEL, or other BIOS keys during startup can be tricky. This guide will show you multiple ways to quickly access UEFI firmware settings in Windows 11.
1. Check If Your PC Supports UEFI.
Before proceeding, check whether your system supports UEFI by following these steps:
1. Open System Information
– Type `msinfo32` in the Windows search bar and press Enter.
2. Find BIOS Mode
– In the left panel, click System Summary.
– On the right side, look for BIOS Mode:
– If it says UEFI, your computer supports UEFI.
– If it says Legacy, your system uses traditional BIOS and does not support UEFI settings.
If UEFI is supported, you can proceed with one of the following methods to access UEFI firmware settings.
2. Method 1: Access UEFI via Windows Settings.
Windows 11 offers a built-in way to restart directly into UEFI firmware settings:
1. Open Windows Settings
– Click the Start Menu, then select Settings.
– Navigate to System > Recovery.
2. Select Advanced Startup
– Under the Advanced Startup section, click Restart now.
3. Enter UEFI Firmware Settings
– After the restart, click Troubleshoot > Advanced Options.
– Select UEFI Firmware Settings, then click Restart.
– Your computer will now boot into the UEFI interface.
This method is easy to use and does not require pressing any keys during startup.
3. Method 2: Use Command Prompt to Access UEFI.
For users who prefer command-line solutions, you can use Command Prompt (CMD) to restart directly into UEFI:
1. Open Command Prompt
– Search for `CMD` in the Windows search bar.
– Right-click Command Prompt and select Run as administrator.
2. Enter the Restart Command
Type the following command and press Enter:
shutdown /r /fw /t 0
3. Automatic Reboot to UEFI
– Your system will restart immediately and enter the UEFI firmware settings automatically.
This is the fastest way to access UEFI, ideal for advanced users.
4. Conclusion: Choose the Best Method for You.
– Use Windows Settings if you prefer a graphical interface.
– Use Command Prompt for a quick one-command solution.
By mastering these methods, you can easily access UEFI to change boot order, enable Secure Boot, or troubleshoot hardware issues.
5. Demo Video.
You can watch the following demo video by select the subtitle to your preferred subtitle language.